Der Beitrag Twin-circuit temperature-controller erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

• Measurements of cover BB1RO: 46x82x80 mm
• Weight: 300 g
• Hat-rail-installation: Hat-rail 35×7,5 mm acc. to DIN 46 277, DIN EN 50 022
• Material of cooling system: black-eloxadized aluminium
• Contoller connection: cross-slotted screw M3x6 mm, max. torque 0,5 Nm
• Load connection: cross-slotted screw M5x6 mm, max. torque 2,4 Nm
• Antiflame cover BB1RO: Material: polycarbonat selfextinguish according to UL 94, protection according to VGB 4.

Der Beitrag SCR Semi-conductor-relay with integrated cooling system erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

Config. 1 = Standard configuration with pre-heating function and thermocouple failure

protection

Config. 2 = pre-heating function, thermocouple failure protection and night reduction

Config. 3 = pre-heating function, thermocouple failure protection and second Thermocouple as overheating – protection.

With the frontal PC-Interface an optimal and quick configuration can be created, imported into the device or exported from the device. With this interface, a graph, as displayed on the next page, can be recorded.

Der Beitrag Digital temperature-controller erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

Der Beitrag Thermocouples erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

Advantages of G-S-D HP heating cartridge

• optimal distribution of power
• knock out plug
• special insulated cable exit
• high resistant heating element

Der Beitrag HP heating cartridge erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

Original diamond, the hardest of all materials, reduces the processing time. You can work either with two graduated roughnesses (rough and fine) or only with a middle roughness.

Easy

1. You can produce a clean and precise surface with less grinding and with less pressure.
2. By the diamond covered abrasive surface of the whole diameter and of the front area, we can ensure a high precision in the rotation and form of the sealing and mating area.
3. There is no need to take care of a special rotation direction as there is no wear of the cutting edges.
4. With the delivered centering ring, we can ensure an exact alignment of the gooseneck and nozzle tip to the centering of the clamping plate.
5. The sealing and mating areas can also be reworked in hot condition.

Durability:

The strong one-cristal-diamond is very resistant. It grinds all strong materials like steel, glass, ceramics, wolfram karbid, stone etc. Because of this extraordinary resistance in wear we can ensure that the hard zinc cinder and other residues can be ground out easily and without abrasion. The temperature resistance of up to 500° additionaly reduces additionally. You can clean the grinding area with the ultrasonic-toolcleaning- machine (FISA) or with one of the according acids.

Der Beitrag Diamond-grinding-cones for gooseneck cone erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

Original diamond, the hardest of all materials, reduces the processing time. You can work either with two graduated roughnesses (rough and fine) or only with a middle roughness.

Easy

1. You can produce a clean and precise surface with less grinding and with less pressure.
2. By the diamond covered abrasive surface of the whole diameter and of the front area, we can ensure a high precision in the rotation and form of the sealing and mating area.
3. There is no need to take care of a special rotation direction as there is no wear of the cutting edges.
4. With the delivered centering ring, we can ensure an exact alignment of the gooseneck and nozzle tip to the centering of the clamping plate.
5. The sealing and mating areas can also be reworked in hot condition.

Durability:

The strong one-cristal-diamond is very resistant. It grinds all strong materials like steel, glass, ceramics, wolfram karbid, stone etc. Because of this extraordinary resistance in wear we can ensure that the hard zinc cinder and other residues can be ground out easily and without abrasion. The temperature resistance of up to 500° additionaly reduces additionally. You can clean the grinding area with the ultrasonic-toolcleaning- machine (FISA) or with one of the according acids.

Der Beitrag Diamond-grinding-cones for nozzle tips erschien zuerst auf Gerhard Schoch Druckgiesstechnik.

The position of the freezing point doesn‘t have to be exactly defined. Increase of the flow velocity.

Disadvantage:

A very high pressure peak is located in the nozzle body area, high loss of the specific injection pressure.

General:

The nozzle tips, as well as the nozzle body are designed according to flow technological aspects. The mass of the nozzle tips is distributed in a way, the direct thermal radiation will avoid a freezing of the zinc in the tip of the nozzle.

• Material: forged hot working steel 1.2343/44
• Heat treatment: through hardened under vacuum
• Processing: we grind the sealing surface of the cone

We provide nozzle tips with and without threads We can produce nozzle tips according to customers requests, if a larger quantity is ordered.

Der Beitrag Nozzle tip with cylindrical drilling erschien zuerst auf Gerhard Schoch Druckgiesstechnik.